Without Daytime Running Lamps (DRL)

Voltage is applied to the Turn/Hazard-Headlight Switch Assembly at all times through the HDLP Circuit Breaker. When the Headlights circuit draws too much current, the HDLP Circuit Breaker opens, interrupting the current flow. With no current flow, the circuit breaker cools off and resets automatically. With the Headlight Switch in HEAD, the Headlight Dimmer Switch applies voltage to either the Lo Beams or the Hi Beams. Voltage is applied to the Hi Beam Indicator along with the Hi Beams.

FLASH-TO-PASS

Voltage is applied at all times to the Flash-To-Pass Switch through the FTP Fuse. When the Flash-To-Pass Switch is closed, voltage is applied to the Hi Beams. The Hi Beam Indicator receives voltage along with the Hi Beams.