Turn Signal Switch - Correct Cancellation After R&R

Number: 93-181-3F
Section: 3F
Date: MAY 1993
Corporate Bulletin No.: 333204
ASE No.: A4

Subject:
INFORMATIONAL PROCEDURE TO INSURE CORRECT TURN SIGNAL SWITCH CANCELLATION WHEN INSTALLING NEW SWITCH

Model and Year:
1991-93 CAVALIER

SERVICE UPDATE

When replacing an inoperative turn signal switch, pay attention to the tightening sequence of the mounting bolts. It is important to torque the upper bolt first, and secondly the lower bolt. Both bolts should be tightened to 3-5 N-m (27-44 lbs. in.).