Door Antenna

Door Antenna:

Note: Use the following procedures for the convertible driver side and all passenger side door antennas.

Remove or Disconnect
1. Door outside protective molding.

2. Door trim panel.

3. Accessory mounting plate.

4. Drill out antenna mounting rivets.

5. Harness connector and retaining clip.

6. Antenna by pulling firmly on each adhesive pad.

Install or Connect
1. Clean inner door surface in area of antenna pad contact.

2. Remove backing from each pad and adhere antenna to door.

3. Rivet antenna to door.

4. Harness connector and retaining clip.

5. Accessory mounting plate.

6. Door trim panel.

7. Door molding.