Troubleshooting Hints

1. Check for open WPR Fuse.
2. If Low Tire Pressure Warning System option is used, check for a shorted capacitor in the Wiper Motor 2-way jumper harness.
3. Check for binding or broken wiper arm linkage.
4. Check for bent or corroded connectors and terminals.
5. If the Washer does not operate, check that:
- The Washer Reservoir is filled.
- The hoses are not pinched or kinked.
- The hoses are correctly attached.
- The nozzles are not clogged.

^ Check for a broken (or partially broken) wire inside of the insulation which could cause system failure but prove "GOOD" in a continuity/voltage check.
^ Check for proper installation of aftermarket electronic equipment which may affect the integrity of other systems.