Pull Down System

PERFORM BEFORE BEGINNING SYSTEM DIAGNOSIS:
^ Rear Compartment Lid Lock must securely lock to Striker for proper operation of Pull-Down Unit.
^ Check for a broken (or partially broken ) wire inside of the insulation which could cause system malfunction but prove "GOOD" in a continuity/voltage check with a system disconnected. These circuits may be intermittent or resistive when loaded and if possible, should be checked by monitoring for a voltage drop with the system operational (under load).
^ Check for proper installation of aftermarket electronic equipment which may affect the integrity of other systems refer Diagnostic Aids. Diagnostic Aids
^ Refer to System Diagnosis. System Diagnosis