Rear Window Release

PERFORM BEFORE BEGINNING SYSTEM DIAGNOSIS:
1. Check I/P Fuse #29. If open, check for a short to ground in CKT 1940.
2. Check that G104 and G300 are clean and tight.
^ Check for a broken (or partially broken) wire inside of the insulation which could cause system malfunction but prove "GOOD" in a continuity/voltage check with a system disconnected. These circuits may be intermittent or resistive when loaded, and if possible, should be checked by monitoring for a voltage drop with the system operational (under load).
^ Check for proper installation of aftermarket electronic equipment which may affect the integrity of other systems refer Diagnostic Aids. Diagnostic Aids
^ Refer to System Diagnosis: Rear Compartment Lid Release. System Diagnosis - Rear Compartment/Rear Window Release