Troubleshooting Hints

PERFORM BEFORE BEGINNING SYSTEM DIAGNOSIS:
^ Check I/P Fuse #32. If I/P Fuse #32 is open, check for a short to ground in CKT 1340 or CKT 29.
^ Check for a broken (or partially broken) wire inside of the insulation which could cause system malfunction but prove "GOOD" in a continuity/voltage check with a system disconnected. These circuits may be intermittent or resistive when loaded, and if possible, should be checked by monitoring for a voltage drop with the system operational (under load).
^ Check for proper installation of aftermarket electronic equipment which may affect the integrity of other systems Refer Diagnostic Aids. Diagnostic Aids
^ Refer to System Diagnosis. Component Tests and General Diagnostics