Crankshaft Position Sensor: Service and Repair

Ignition Coil Assembly & CKP Sensor Electronic Ignition System:

Remove or Disconnect

1. Sensor harness connector at module.
2. Sensor to block bolt (1).
3. Sensor from engine.

Inspect
^ Sensor O-ring for wear, cracks or leakage. Replace if necessary. Lube new O-ring with engine oil before installing.

Install or Connect

1. Sensor into block.
2. Sensor to block bolt (1).
^ Torque to 8 Nm (71 lb in).
3. Sensor harness connector.