Troubleshooting Hints - Power Windows

PERFORM BEFORE BEGINNING SYSTEM DIAGNOSIS
1. If windows move slowly, check for:
- Mechanical binding or non-greased pivot joints.
- Fully charged Battery.
- Clean and tight grounds G201 and G202.
2. If switches do not illuminate when Park Lamps are turned "ON," refer to Interior Lights Dimming. Lighting and Horns
^ Check for a broken (or partially broken) wire inside of the insulation which could cause system malfunction but prove "GOOD" in a continuity/voltage check with a system disconnected. These circuits may be intermittent or resistive when loaded, and if possible, should be checked by monitoring for a voltage drop with the system operational (under load).
^ Check for proper installation of aftermarket electronic equipment which may affect the integrity of other systems (Refer to General Troubleshooting Procedures). Diagnostic Aids
^ Refer to System Diagnosis. System Diagnosis - Power Windows