Instrument Panel Cluster Trim Plate Replacement

INSTRUMENT PANEL CLUSTER TRIM PLATE









REMOVE OR DISCONNECT
1. Disable SIR system.
2. I/P trim pad.
3. Screws to trim plate.
4. Gently pry trim plate from I/P only near the retaining clips. See location of retaining clips in Figure.
5. I/P lamp dimmer electrical connector.

INSTALL OR CONNECT
1. I/P lamp electrical connector.
2. Align trim plate tabs to retainers around HVAC control and radio.
3. Screws to trim plate.
4. I/P trim pad.
5. Enable SIR system.