Service Procedure

1. Raise vehicle on a hoist and inspect transaxle identification nameplate.

- If transaxle Julian Date information indicates 258, 259, 262, 263, 264 or 292, the transaxle MUST BE REPLACED; go to step 2.

- If transaxle Julian Date information is other than listed above. DO NOT REPLACE the transaxle; go to Step 4.

2. Replace transaxle assembly. See appropriate 1995 Service Manual, Section 7A, for the transaxle replacement procedure.

3. Remove transaxle assembly must be crated in the original shipping container and returned in the usual manner with the appropriate information included.

Note:
Transaxle cores must have a completed Product Feedback form. The Product Feedback form MUST include the VIN, mileage and campaign number. This information will aid in the timely processing of transaxle cores.

4. Install Campaign Identification Label.