Door Energy Absorber Pad - Revised Replacements
File In Section: 10 - BodyBulletin No.: 43-10-49
Date: October, 1994
Subject:
Door Energy Absorber Pad Replacement
Models:
1995 Chevrolet Lumina Sedan (Rear Doors)
1995 Chevrolet Monte Carlo Coupe (Front Doors)
The energy absorber pads located on coupe door inner panels and sedan rear door inner panels are an integral part of the occupant protection system. If for any reason these pads are destroyed or broken, they must be replaced with new parts from GMSPO, P/N's listed below:
Coupe Doors 10169694 (LT) 10169695 (RT)
Sedan Rear Doors 10263453 (LT) 10263454 (RT)
New parts are serviced with a double backed tape for adhesion to the door inner panel to prevent squeaks. Should it become necessary to use additional adhesive, use 3M* Spray Adhesive P/N 8074 (or equivalent). Most adhesives when used on styrofoam will cause the styrofoam to disintegrate.
* We believe this source and their equipment to be reliable. There may be additional manufacturers of such equipment. General Motors does not endorse, indicate any preference for or assume any responsibility for the products or equipment from these firms or for any such items which may be available from other sources.
Parts Information
Parts are currently available from GMSPO.