Rear Compartment Lid Applique - Loose or Separated
Group Ref.: 10 - BodyBulletin No.: 431502
Date: July, 1994
SUBJECT:
LOOSE, SEPARATED, OR WARPED REAR COMPARTMENT LID APPLIQUE (REPLACE APPLIQUE)
MODEL:
1995 CHEVROLET MONTE CARLO
CONDITION:
Some early vehicles produced before June, 1994, may exhibit a loose, separating or warped rear applique.
CAUSE:
This may be caused by improperly cured adhesive or insufficient detail clearance for thermal cycling.
CORRECTION:
Replace the applique per Service Manual, Section 10-8. When installing the new part, tighten the fasteners starting with the center most attachment and work outboard.
^ Torque fasteners to 4 N-m (35 lb.in.)
PART AVAILABILITY:
Parts are expected to be available on 7/04/94 at GMSPO.
PARTS REQUIRED:
5977855 (Less VB7) (LS) Applique, Rear
Compartment Lid 5977866 (With VB7) (Z-34)
Applique, Rear Compartment Lid
WARRANTY INFORMATION:
For vehicles repaired under warranty, use:
Labor Operation Labor Time
B8548 Use Published Labor
Operation Time.