| Front Brake Rotor | Rotor Diameter(Nominal) | | | 10.945 Inch (in) |
| Lateral Runout | | | 0.005 Inch (in) |
| Thickness Variation | | | 0.0005 Inch (in) |
| Rotor Thickness (Maximum) | | | 1.26 Inch (in) |
| Minimum Thickness After Refinish | | | 1.25 Inch (in) |
| Discard Thickness | | | 1.209 Inch (in) |
| Rear Brake Rotor | Rotor Diameter (Nominal) | | | 11.535 Inch (in) |
| Lateral Runout (Rear) | Brake Rotor (On-Vehicle Condition) | | 0.006 Inch (in) |
| | Axle Shaft Flange | | 0.002 Inch (in) |
| Thickness Variation | | | 0.0005 Inch (in) |
| Rotor Thickness (Maximum) | | | 0.787 Inch (in) |
| Minimum Thickness After Refinish | | | 0.733 Inch (in) |
| Discard Thickness | | | 0.724 Inch (in) |
| Refinishing Specifications | Ammco Brake Lathe | Rough Cut | Spindle Speed | 150 RPM |
| | | Depth of Cut (Per Side) | 0.006 To 0.025 Inch (in) |
| | | Tool Cross Feed (Per Revolution) | 0.01 Inch (in) |
| | | Anti-Chatter Silencer | Yes |
| | | Sand Brake Rotor (Swirl Pattern) | No |
| | Finish Cut | Spindle Speed | 150 RPM |
| | | Depth of Cut (Per Side) | 0.004 To 0.006 Inch (in) |
| | | Tool Cross Feed (Per Revolution) | 0.002 Inch (in) |
| | | Anti-Chatter Silencer | Yes |
| | | Sand Brake Rotor (Swirl Pattern) | Yes |
| Accu-turn Brake Lathe | Finish Cut | | 105 RPM |
| | Depth of Cut | | As Necessary |
| | Tool Cross Feed (Per Revolution) | | 0.003 Inch (in) |
| | Anti-Chatter Silencer | | Yes |