Operation CHARM: Car repair manuals for everyone.

Connector End Views

Connector End Views show the cavity or terminal locations for all the related 2 pin or larger connectors shown in the system schematic(s). The drawings show the connector faces as seen after the harness connector has been disconnected from a component or mating connector. Cavities that are not used are left blank in the table.

In addition, the color and part number of the connector body is provided along with the family/series name.

If you need to backprobe a connector while it is on the component, the order of the terminals must be mentally reversed. The wire color is a help in this situation. If there is more than one wire of the same color, you may need to locate a test point from its terminal number. A useful trick is to imagine that you are probing a terminal from behind the page you are looking at. Then mentally locate that terminal with respect to the keyway or other reference mark.