System Specifications

Cylinder Line End Fittings 27 Nm (20 ft. lbs.)
Cylinder Line Valve End Fittings 16.9 Nm (13 ft. lbs.)
Intermediate Shaft Shield Clamp 3.5 Nm (32 inch lbs)
Inner Tie Rod 100 Nm (74 ft. lbs.)
Pinion Preload 1.8 Nm (16 inch lbs.)
O-ring Union Fitting 75 Nm (55 ft. lbs.)
Outer Tie Rod Jam Nut 60 Nm (44 ft. lbs.)
Outer Tie Rod Nut to Knuckle
1. Tighten the nut to 20 Nm (15 ft. lbs.) to seat the joint.
2. Turn the nut 2 1/2 flats.
3. Check the nut for a minimum of 30 Nm (22 ft. lbs.).
Power Steering Cooler:
Fitting to Power Steering Gear 27 Nm (20 ft. lbs.)
Mounting Bolts to Crossmember 11 Nm (97 inch lbs.)
Power Steering Gear:
Inlet Hose to Power Steering Gear 27 Nm (20 ft. lbs.)
Mounting Bolt Nuts to Crossmember 100 Nm (74 ft. lbs.)
Power Steering Pump Mounting Bolts 25 Nm (18 ft. lbs.)
Power Steering Reservoir Bracket Bolts to Engine 50 Nm (37 ft. lbs.)