Drive/Propeller Shafts, Bearings and Joints: Specifications

Clutch Actuator Cylinder Mounting Bolts 12 Nm (106 inch lbs.)
Driveline Support Assembly To Engine Flywheel
Housing Bolts 50 Nm (37 ft. lbs.)
Driveline Tunnel Closeout Panel Bolts 10 Nm (89 inch lbs.)
EBTCM LH Mounting Bracket Mounting Bolts 50 Nm (37 inch lbs.)
Flexplate To Propeller Shaft Rear Bearing Bolts 50 Nm (37 ft. lbs.)
Input Shaft To Front Propeller Shaft Coupler Bolts 55 Nm (41 ft. lbs.)
Negative Battery Cable Bolt 15 Nm (11 ft. lbs.)
Propeller Input shaft Front Bearing Positioning Bolts 35 Nm (26 ft. lbs.)
Propeller Shaft Hub Clamp Bolt 130 Nm (96 ft. lbs.)
Rear Bearing Assembly To:
Driveline Support Tube Bolts 65 Nm (48 ft. lbs.)
Rear Propeller Shaft Coupler Bolts 55 Nm (40 ft. lbs.)
Rear Exhaust Hanger Mounting Bolts 50 Nm (37 ft. lbs.)
Rear Shock Absorber Lower Mounting Bolt 220 Nm (162 ft. lbs.)
Rear Suspension Crossmember Mounting Nuts 110 Nm (81 ft. lbs.)
Shift Control Closeout Boot Retaining Nuts 12 Nm (106 inch lbs.)
Shift Control Mounting Bolts 30 Nm (22 ft. lbs.)
Transaxle Mount:
Bracket To Differential Bolts 50 Nm (37 ft. lbs.)
To Rear Suspension Crossmember Nuts 50 Nm (37 ft. lbs.)
Transmission Oil Cooler Rear Pipe:
Front And Rear Retaining Clamp Bolts 12 Nm (106 inch lbs.)
Front Fittings To Junction At Engine
Flywheel Housing 27 Nm (20 ft. lbs.)
Rear Fittings To Transmission Fittings 27 Nm (20 ft. lbs.)
Transmission Shift:
Control Cable Bracket Retaining Nuts 20 Nm (15 ft. lbs.)
Rod Clamp Bolt 30 Nm (22 ft. lbs.)
Transmission To Driveline Support Assembly
Bolts/Studs 50 Nm (37 ft. lbs.)
Transmission Wiring Harness To:
LH Transmission Case Retaining Bolt 2.5 Nm (22 inch lbs.)