Wiper and Washer Systems: Service and Repair

REMOVAL PROCEDURE
Tools Required
J 39232 Wiper Linkage Separator

Wiper Transmission Replacement: Removal Procedure:

CAUTION: Refer to Battery Disconnect Caution in General Information.

1. Disconnect the negative battery cable.
2. Remove the wiper arm assemblies.
3. Remove the air inlet screen.
4. Remove the wiper motor module assembly.
5. Remove the RH wiper transmission mounting bolts.
6. Remove the RH wiper transmission from the wiper transmission linkage
7. Disconnect the wiper transmission linkage from the wiper motor module assembly.
8. Remove the LH wiper transmission mounting bolts.
9. Remove the LH wiper transmission from the wiper transmission linkage.

INSTALLATION PROCEDURE
Tools Required
J 39529 Wiper Linkage Installer

Wiper Transmission Replacement: Installation Procedure:

1. Install the LH wiper transmission into the wiper transmission linkage.
2. Install the LH wiper transmission mounting bolts.

Tighten
Tighten the wiper transmission mounting bolts to 10 N.m (89 lb in).

NOTE: Refer to Fastener Notice in General Information.

3. Connect the wiper transmission linkage onto the wiper motor.
4. Install the RH wiper transmission into the wiper transmission linkage.

Tighten
Tighten the wiper transmission mounting bolts to 10 N.m (89 lb in).

5. Install the wiper motor module assembly.
6. Install the air inlet screen.
7. Install the wiper arm assemblies.

CAUTION: Refer to Battery Disconnect Caution in General information.

8. Connect the negative battery.