Rear Compartment Lamp Replacement

Remove or Disconnect
1. Open rear compartment lid.
2. Bolt/screw from ground wire.
3. Rear compartment lamp by sliding the clip loose.
4. Slide the clip loose holding the connector.
5. Electrical connector.

Install or Connect

NOTICE: Refer to Service Precautions.

1. Electrical connector.
2. Connector clip onto rear compartment lid.
3. Rear compartment lamp by sliding clip onto compartment lid.
4. Bolt/screw to ground wire.

Tighten
^ Bolt/screw to 3 N.m (27 lb. in.).