Headlamp Aiming - Using the Headlamp Aimer

Composite Headlamp Aiming (Typical):

Composite Headlamp Aiming Rods (Typical):

Tool Required:
J 25300-B Headlamp Aimer

Headlamp Aiming Procedure
1. Adjust headlamp aimers for floor level.
2. Select the appropriate adapter from J 25300-B.
3. Set the adjustment rods to the numbers shown on the front of the headlamp capsule.
4. Attach the adapter to the aimer from J 25300-B.
5. Attach the aimers to the headlamp capsule, making sure that adjustment rods are contacting the aiming pads. (You may have to add or remove an extension stud.)
6. Aim the headlamps according to the aiming tool manufacture's instructions.
7. If adjustments are needed: Horizontal adjustments may be made with the inner adjustment screw. Vertical adjustment may be made with the upper adjustment screw.