Cruise Control Module: Service and Repair

Cruise Control Cable Attachment To Module (Typical):

Cruise Control Module Mounting:

CAUTION: Refer to "CAUTION".
The cruise control module is mounted to the left strut tower and must be serviced as a complete unit.

REMOVE OR DISCONNECT
1. Cruise control cable from module.
2. Electrical connector from module.
3. Module to shock tower nuts.

INSTALL OR CONNECT

Refer to Service Precautions.

1. Module on mounting studs.
2. Module to shock tower nuts.
Tighten
^ Nuts to 2 N.m (18 lb. in.).
3. Electrical connector to module.
4. Cruise control cable to module.
Adjust
^ Cruise control cable.