Evaporator Core: Service and Repair

Remove or Disconnect

1. Air cleaner and duct assembly.
2. Recover refrigerant. Refer to "Refrigerant Recovery and Recycling, Adding Oil, Evacuating and Charging Procedures."
3. Drain cooling system.
4. Heater core.
5. Evaporator core block connection at cowl.
6. Evaporator core cover.
7. Evaporator.

Install or Connect

1. Evaporator
2. Evaporator core cover.
3. Evaporator core block connector.

Tighten
^ Bolt to 16 N.m (12 lb. ft.).

4. Heater core.
5. Fill cooling system and check for leaks.
6. Evacuate, charge and leak test system. Refer to "Refrigerant Recovery and Recycling, Adding Oil, Evacuating and Charging Procedures."
7. Air cleaner and duct assembly.