Windshield Washer Reservoir: Service and Repair

Washer Pump:

Figure 7

Remove or Disconnect
1. Negative battery cable from battery.
2. Connector (1) from washer pump (2).
3. Hose (3) from washer pump (2).
4. Screw (4).
5. Two retainers (5) and washer solvent container assembly (6) from vehicle.

Install or Connect

NOTICE: Refer to Service Precautions.

1. Washer solvent container assembly (6) on vehicle with two retainers (5).
2. Screw (4).

Tighten
^ Screw (4) to 5 N.m (44 lb. in.).

3. Hose (3;) to washer pump (2).
4. Connector (1) to washer pump (2).
5. Negative battery cable to battery.