Instrument Panel Dimmer Switch Replacement

REMOVAL PROCEDURE
1. Disable the SIR system.
2. Remove the left sound insulator.
3. Disconnect the electrical connector.
4. Remove the screws from the dimmer module (1).

INSTALLATION PROCEDURE

NOTE: Refer to Fastener Notice in Cautions and Notices.

1. Install the screws to the dimmer module (1).

Tighten
Tighten the screws to 2 Nm (18 lb in).

2. Connect the electrical connector.
3. Install the left sound insulator.
4. Enable the SIR system.