Tail Lamp: Service and Repair

REMOVAL PROCEDURE
1. Disconnect the tail lamp wire harness sockets (6).
2. Remove the tail lamp nut (1).
3. Remove the tail lamp (5).

INSTALLATION PROCEDURE
1. Install the tail lamp (5).
2. Align the tail lamp to the deck lid applique.

NOTE: Refer to Fastener Notice in Cautions and Notices.

3. Install the tail lamp nut (1).

Tighten
Tighten the tail lamps nuts to 5 N.m (44 lb in).

4. Connect the tail lamp wire harness sockets (6).