Removing the Customer's Code

(To Deactivate the Theft-Deterrent From the Unlocked Mode, Deterrent Activated:)

IMPORTANT: Either the owner's code or the factory backup code can be used to remove the owner's code.

IMPORTANT: The theft-deterrent is already deactivated and no code is stored if the display changes to "- - -".

1. Turn the radio OFF. Press and hold push button numbers 1 and 4 for about 6 seconds until the display changes to read SEC.
2. Press HR to set the first two digits (0-19) of the code.
3. Press MN to set the next two digits (0-99) of the code.
4. Press the AM/FM button to enter the code. Theft-Deterrent is deactivated when "- - -" appears on the display and then the time of day displays.