Trunk / Liftgate: Service and Repair

REMOVAL PROCEDURE

Note: When removing body panels, apply tape to corners of panel and adjacent surfaces to help prevent paint damage.

Compartment Lid Replacement: Rear - Removal Procedure:

1. Provide protection to prevent scratching the panels.
2. Open the rear compartment lid and support.
3. Mark the location of the hinges to the lid to aid in installation.
4. Remove the bolts attaching the hinges to the lid.
5. Remove the lid.
6. Transfer parts as necessary.

INSTALLATION PROCEDURE

Compartment Lid Replacement: Rear - Installation Procedure:

1. Install the bolts attaching the hinges to the lid.

Tighten
Tighten the rear compartment hinge bolts to 31 N.m (23 lb ft).

Compartment Lid Replacement: Rear - Installation Procedure:

2. Install and adjust the overslam bumpers.