Folding Top Seal Compression Panel Replacement

REMOVAL PROCEDURE

Folding Top Seal Compression Panel Replacement: Removal Procedure:

1. Remove the retainer attaching the front side rail seal to the number one bow.
2. Remove the screws attaching the seal compression panel to the number one bow.
3. Remove the panel.

INSTALLATION PROCEDURE

Folding Top Seal Compression Panel Replacement: Installation Procedure:

1. Position the seal compression panel to the number one bow.
2. Install the screws attaching the panel to the number one bow.

Tighten
Tighten the seal compression panel screws to 3 N.m (25 lb in).

3. Install the fastener attaching the front side rail seal to the number one bow.