Troubleshooting Hints - Compressor/Condenser Fan Controls

PERFORM BEFORE BEGINNING SYSTEM DIAGNOSIS
1. Check A/C Fuse.
2. Check HEATER Fuse.
3. Check IG-COIL Fuse.
4. Check that Blower Motor operates. Refer to System Check in Heater System operation. System Check - Heater - Without A/C
5. Check that G102, G103, G201 and G202 are clean and tight.
6. Check that A/C System is properly charged with refrigerant.
7. Before component replacement, check for poor connections at related component and in-line harness connector terminal connections.