Instrument Panel Cluster Indicator Lamp Replacement

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.

1. Disconnect the negative battery cable.
2. Remove the instrument panel cluster assembly.
3. Remove the bulb sockets from the back of the cluster assembly, as necessary.
4. Remove the bulbs from the bulb sockets, as necessary.

INSTALLATION PROCEDURE
1. Install any bulbs to the bulb sockets.
2. Install the bulb sockets to the back of the cluster.
3. Install the instrument panel cluster assembly.
4. Connect the negative battery cable.