Rear Window Panel Lamps With SEO/RPO 9C3

Rear Window Panel Lamps With SEO 9C3:

REMOVE OR DISCONNECT
1. Rear seat cushion and seat back.
2. Electrical connector.
3. Bolts/screws attaching bracket to rear window panel.
4. Bracket with attached lamp.

INSTALL OR CONNECT

NOTE: Refer to Fastener Notice in Cautions and Notices.

1. Bracket with attached lamp.
2. Bolts/screws attaching bracket to rear window panel.

Tighten
^ Bolts/screws to 1.5 N.m (13 lb. in.).

3. Electrical connector.
4. Rear seat cushion and seat back.