Instrument Panel Center Compartment Replacement

REMOVAL PROCEDURE



1. Remove the right body hinge pillar trim panel.
2. Remove the two lower bolts that secure the I/P compartment.
3. Open the I/P compartment door.
4. Remove the following components from the vehicle:
^ The three upper screws (1)
^ The I/P compartment (2)

INSTALLATION PROCEDURE



1. Install the I/P compartment (2) to the instrument panel. Secure the compartment with the upper three screws (1).
2. Close the I/P compartment door.
3. Install the two I/P compartment lower retaining bolts.

Tighten
Tighten the I/P compartment lower retaining bolts to 15 Nm (11 lb ft).

4. Install the right body hinge pillar trim panel.