Knock Sensor: Service and Repair

Knock Sensor Replacement

Removal Procedure
1. Remove the air intake manifold.

Knock Sensor (KS):

2. Disconnect the knock sensor (KS) electrical connector (2).
3. Remove the KS (1) from the engine block.

Installation Procedure

Notice: Refer to Fastener Notice

Knock Sensor (KS):

1. Install the KS (1) to the engine block.

Tighten
Tighten the KS to the engine block to 39 N.m (29 lb ft).

2. Connect the KS electrical connector (2).
3. Install the air intake manifold.