Starting System: Specifications

STARTER MOTOR USAGE

Voltage 12 Volts
Output Manual Transaxle 1.2 kwatts
Output Automatic Transaxle 1.4 kwatts
Rating 30 seconds
Direction of Rotation Clockwise (as viewed from pinion)
Number of Pinion Teeth 9
Starter Solenoid Operating Voltage 8 Volts minimum
Starter Current Draw, no load, manual transaxle 90 Amps at 11.5 Volts
Starter Current Draw, no load, automatic transaxle 90 Amps at 11.5 Volts
Starter Current Draw, load, manual transaxle
(9.1 N.m 180.5 lb in of torque) 300 Amps at 7.7 Volts
Starter Current Draw, load, automatic transaxle
(10.4 N.m/92 lb in of torque) 300 Amps at 7.7 Volts
Locked Rotor - Manual Transaxle (18.6 N.m/13.8 lb ft) 780 Amps at 4 Volts
Locked Rotor - Automatic Transaxle (25.5 N.m/18.8 lb ft) 980 Amps at 4 Volts
Commutator Runout - Standard 0.05 mm (0.002 in)
Commutator Runout - Maximum 0.40 mm (0.016 in)
Commutator Outside Diameter - Standard 30 mm (1.18 in)
Commutator Outside Diameter - Minimum 29 mm (1.14 in)
Commutator Insulation Depth - Standard 0.60 mm (0.024 in)
Commutator Insulation Depth - Minimum 0.20 mm (0.008 in)
Brush Length Standard 15.5 mm (0.610 in)
Brush Length - Minimum 10.0 mm (0.394 in)
Brush Spring Tension - Standard 1.8-2.4 kg (4.0-5.3 lbs)
Brush Spring Tension - Minimum 1.2 kg (2.6 lbs)
Solenoid Contact Plate Wear - Maximum 0.9 mm (0.035 in)