Rear Window Reveal Molding Replacement

REMOVAL PROCEDURE

IMPORTANT:
^ Do not attempt to replace the rear window reveal molding without removing the rear window.
^ When replacing the rear window, do not reuse the original rear window reveal molding. Replace the original rear window reveal molding using a new rear window reveal molding.
^ New rear window reveal moldings are primed and will adhere to the urethane adhesive.
^ Prefit the rear window reveal molding to the rear window as an assembly on the body prior to the actual installation.
^ Use a heat lamp in order to ensure that the rear window reveal molding becomes more pliable.

Windshield Reveal Molding Replacement: Removal Procedure:

1. Remove the rear window (4).
2. Remove the rear window reveal molding (1) from the rear window.

INSTALLATION PROCEDURE

Windshield Reveal Molding Replacement: Removal Procedure:

1.Install the rear window reveal molding (1) to the rear window.

Starting at the center, hand press the rear window reveal molding into position.
2. Prefit the rear window reveal molding and the rear window as an assembly to the body prior to the actual installation.

Apply tape in order to position the rear window reveal molding flush with the rear window.
3. Install the rear window (4).