Backup Lamp Replacement (Assembly)
REMOVAL PROCEDURE
1. Remove the rear license frame. Carefully depress the locking tabs with a flat-bladed screwdriver.
2. Remove the rear license plate.
3. Remove the backup lamp assembly (w/rear license bracket) retaining screws.
4. Partially remove the backup lamp assembly to expose the backup lamp sockets.
5. Remove the backup lamp sockets from the backup lamp assembly.
Rotate the sockets counterclockwise to release the locking tabs.
6. Remove the backup lamp assembly (w/rear license bracket) from the vehicle.
INSTALLATION PROCEDURE
1. Install the backup lamp sockets to the backup lamp assembly (w/rear license bracket). Rotate the sockets clockwise to engage the locking tabs.
2. Install the backup lamp assembly into position on the vehicle.
NOTE: Refer to Fastener Notice in Cautions and Notices.
3. Install the backup lamp assembly (w/rear license bracket) retaining screws.
Tighten
Tighten the backup lamp and rear license assembly retaining screws to 2 N.m (18 lb in).
4. Install the rear license plate.
5. Install the rear license frame. Align the locking tabs, then push to lock.