Compartment Lid Lamp Replacement - (SEO) (RPO T53)

REMOVAL PROCEDURE
1. Open the rear compartment lid.
2. Disconnect the electrical connector(s) from the rear compartment lid lamp(s) to be removed.
3. Remove the bolts retaining the lamp bracket(s) to the rear compartment lid.
4. Remove the rear compartment lid lamp(s) with bracket(s).

INSTALLATION PROCEDURE
1. Install the rear compartment lid lamp(s) with bracket(s) into position on the rear compartment lid.

NOTE: Refer to Fastener Notice in Cautions and Notices.

2. Install the rear compartment lid lamp bracket to rear compartment lid retaining bolts.

Tighten
Tighten the rear compartment lid lamp bracket retaining bolts to 4 N.m (35 lb in).

3. Connect the electrical connector(s) to the rear compartment lid lamp(s).
4. Close the rear compartment lid.