Oil Level Sensor: Service and Repair

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.

1. Disconnect the negative battery cable.
2. Raise the vehicle. Refer to Vehicle Lifting in Service Precautions.
3. Drain the engine oil.
4. Disconnect the electrical connector from engine oil level switch
5. Remove the engine oil level switch from the oil pan.

INSTALLATION PROCEDURE

NOTE: Refer to Fastener Notice in Service Precautions.

1. Install the engine oil level switch.

Tighten
Tighten the oil pressure sensor to 16 N.m (40 lb in).

2. Lower the vehicle.
3. Add the engine oil to the correct level. For the crankcase oil capacity, refer to Service Precautions.

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.

4. Reconnect the negative battery cable.