Air Temperature Sensor ( Ambient / Intake ): Service and Repair

Intake Air Temperature Sensor Replacement


The IAT sensor is mounted in the rear air intake duct.

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.

1. Disconnect the negative battery cable.
2. Disconnect the IAT sensor electrical connector.
3. Grasp and remove the IAT sensor (3) with a twisting and pulling motion.

INSTALLATION PROCEDURE
1. Position and insert the IAT sensor (3) into the rear air intake duct (2).
2. Connect the IAT sensor electrical connector.

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.

3. Reconnect the negative battery cable.