Operation CHARM: Car repair manuals for everyone.

Battery Hold Down Retainer Replacement




REMOVAL PROCEDURE
1. Remove the air cleaner assembly.

CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.

2. Disconnect the negative battery cable.
3. Remove the front end sheet metal diagonal brace.
4. Remove the washer solvent container assembly.
5. Remove the air cleaner assembly bracket from the fender bolt.
6. Remove the battery hold-down retainer bolt.
7. Remove the battery hold-down retainer.

INSTALLATION PROCEDURE
1. Install the battery hold-down retainer.

NOTE: Refer to Fastener Notice in Cautions and Notices.

2. Install the battery hold-down retainer bolt.

Tighten
Tighten the battery hold-down retainer bolt to is 18 N.m (13 lb ft).

3. Install the air cleaner bracket upper bolt.

Tighten
Tighten the air cleaner bracket upper bolt to 4 N.m (35 lb in).

4. Install the washer solvent container assembly.
5. Install the front end sheet metal diagonal brace.
6. Connect the negative battery cable.
7. Install the air cleaner assembly.