Power Trunk / Liftgate Lock Switch: Service and Repair

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.

1. Disconnect the negative battery cable.
2. Disable the SIR system. Refer to Disabling the SIR System in SIR.
3. Use a blunt tool in order to unsnap the deck lid switch (2) from the instrument panel (1).
4. Disconnect the electrical connector from the deck lid switch.

INSTALLATION PROCEDURE
1. Connect the electrical connector to the deck lid switch.
2. Install the deck lid switch (2) into the instrument panel (1).
3. Enable the SIR system. Refer to Enabling the SIR System in SIR.
4. Connect the negative battery cable.