Oil Pressure Sensor: Service and Repair

Removal Procedure

Caution: Refer to Battery Disconnect Caution In Service Precautions.





1. Disconnect the negative battery cable
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Disconnect the electrical connector from the engine oil pressure sensor.
4. Remove the engine oil pressure switch.

Installation Procedure

Notice: Refer to Fastener Notice in Service Precautions.





1. Install the engine oil pressure switch.

^ Tighten the switch to 16 Nm.

2. Connect the electrical connector to the engine oil pressure switch.
3. Lower the vehicle.
4. Connect the negative battery cable.