Power Window Switch: Service and Repair

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.

1. Disconnect the negative battery cable.
2. Remove the door power window switch (3) from the door by prying at the top of the switch with a flat bladed tool.
3. Disconnect the electrical connector (2) from the power door window switch.
4. Remove the bezel (1) from the power door window switch (3) by prying out the retainers (4) with the flat bladed tool.

INSTALLATION PROCEDURE
1. Install the bezel (1) to the door power window switch (3).
2. Connect the electrical connector (2) to the power window switch (3).
3. Install the power window switch (3) to the door.
4. Connect the negative battery cable.