Coupe

REMOVAL PROCEDURE





CAUTION: Disconnect the power window switch when working inside the drivers door. When operated, the Express Down feature allows the door window to drop very quickly, which could cause personal injury.

IMPORTANT: When removing a door trim panel or switch plate, the ignition switch must be in the OFF position. This will eliminate the possibility of shorting out the switch it a flat-bladed tool, awl or metal object is used to remove the switch from the harness.

IMPORTANT: Use protective coating/tape at the point of insertion of the flat surface tool.

1. Remove the switch plate assembly from the front door inner trim panel.
Use a flat-bladed tool.




2. Disconnect the electrical connector.




3. Unsnap the driver side front door power window switch from the mounting plate.




4. Unsnap the passenger side front door power window switch from the mounting plate.

INSTALLATION PROCEDURE




1. Snap the passenger side front door power window switch into the mounting plate.




2. Snap the driver side front door power window switch into the mounting plate.
3. Connect the electrical connector.




4. Snap the passenger side switch plate assembly into the front door inner trim panel.




5. Snap the driver side switch plate assembly into the front door inner trim panel.