Engine Block Data/Specifications
| Cylinder Bore | Diameter | 3.5046-3.5053 Inch (in) |
| Out Of Round Maximum | 0.0005 Inch (in) | |
| Taper - Thrust Side Maximum | 0.0008 Inch (in) | |
| Camshaft Bearing Bore Diameter | Front and Rear | 2.009-2.011 Inch (in) |
| Middle #2 and #3 | 1.999-2.001 Inch (in) | |
| Oil Gallery Plug - 1/4 inch | 14 Foot Pound-Force (ft.lb) | |
| Oil Gallery Plug - 3/8 inch | 24 Foot Pound-Force (ft.lb) | |
| Crankshaft Main Bearing Cap Bolt/Stud | 37 ft. lbs. + 77deg |