Instrument Panel (IP) - Harness Replacement
REMOVAL PROCEDURE1. Remove the instrument panel assembly.
2. Remove the following components from the instrument panel:
2.1. The 1 screw
2.2. The right I/P outer air outlet
2.3. The plastic retainer
2.4. The left I/P outer air outlet
2.5. The 2 screws
2.6. The 6 wire harness retainers
2.7. The instrument panel wiring harness
INSTALLATION PROCEDURE
1. Install the instrument panel wiring harness to the instrument panel assembly. Secure the harness with the following:
^ The 6 wire harness retainers
^ The 2 screws
2. Install the left I/P outer air outlet to the instrument panel assembly. Secure the duct with the plastic retainer.
3. Install the right I/P outer air outlet to the instrument panel assembly. Secure the duct with the screw.
4. Install the instrument panel assembly.