I/P Compartment Lamp (Glovebox)

Voltage is supplied to the I/P compartment lamp from CKT 640. CKT 640 receives battery voltage when the MONITORED LD Micro Relay #43 has closed its contact switch. The opening and closing of the MONITORED LD Micro Relay #43 is controlled by the BCM through CKT 1393 Whenever the ignition is ON the BCM will ground CKT 1393 and energize the relay which supplies battery positive voltage to CKT 640. Battery voltage is then supplied the I/P compartment lamp and it becomes functional. When the ignition is turned OFF the BCM will monitor CKT 640 at the BCM connector C2 terminal C4 for continuity to ground through the I/P compartment lamp and switch assembly. In the event that the I/P compartment is inadvertently left open, the BCM will energize the MONITORED LD Micro Relay #43 for approximately 15 minutes then de-energize the relay. This function is used to help prevent the battery from losing voltage over a period of time in the case of a load being left ON. The I/P compartment lamp is grounded by CKT 150 through Splice Pack #202 to G202.