Interior Moulding / Trim: Service and Repair

Coat Hook Replacement

Removal Procedure




1. Remove the coat hook hole cover (2).
2. Remove the coat hook screw (3).
3. Remove the coat hook (4).

Installation Procedure




1. Align the coat hook (4) with the backing plate.
2. Install the coat hook (4).

Notice: Refer to Fastener Notice in Service Precautions.

3. Install the coat hook screw (3).

Tighten the coat hook screw to 1.0 N.m (9 lb in).

4. Install the coat hook hole cover (2).