Park/Turn Signal Side Marker Lamp Replacement (Front)

REMOVAL PROCEDURE
1. Remove the screws (1) from the sidemarker lamp (2).
2. Remove the sidemarker lamp (2) from the front fascia panel (5).
3. Remove the socket (4) from the sidemarker lamp (2).
4. Remove the bulb (3) from the socket (4).

INSTALLATION PROCEDURE
1. Install the bulb (3) to the socket (4).
2. Install the socket (4) to the sidemarker lamp (2).
3. Install the sidemarker lamp (2) to the front fascia panel (5).

NOTE: Refer to Fastener Notice in Cautions and Notices.

4. Install the screws (1) to the sidemarker lamp (2).

Tighten
Tighten the screws to 2 N.m (18 lb).