Fuel Tank Pressure Sensor: Service and Repair

REMOVAL PROCEDURE
1. Relieve the system fuel pressure. Refer to Fuel Pressure Relief Procedure. Service and Repair
2. Drain fuel tank. Refer to Fuel Tank Draining Procedure. Procedures
3. Remove the fuel tank.
4. Disconnect the fuel tank vapor pressure sensor electrical connector.
5. Remove the fuel tank vapor pressure sensor from modular fuel sender.

INSTALLATION PROCEDURE
1. Install the new fuel tank vapor pressure sensor to modular fuel sender.
2. Connect the fuel tank vapor pressure sensor electrical connector.
3. Install the fuel tank.
4. Refill tank and install the fuel fill cap.
5. Install the negative battery cable.